Estimation of hand and finger kinematics using inertial sensors

A new dataglove is developed and presented. Inertial sensors are placed on various hand and finger segments to estimate the hand pose

Spatio-temporal development of vegetation die-off in a submerging coastal marsh

In several places around the world, coastal marsh vegetation is converting to open water through the formation of pools. This is concerning, as vegetation die-off is expected to reduce the marshes\u27 capacity to adapt to sea level rise by vegetation-induced sediment accretion. Quantitative analyses of the spatial and temporal development of marsh vegetation die-off are scarce, although these are needed to understand the bio-geomorphic feedback effects of vegetation die-off on flow, erosion, and sedimentation. In this study, we quantified the spatial and temporal development of marsh vegetation die-off with aerial images from 1938 to 2010 in a submerging coastal marsh along the Blackwater River (Maryland, U.S.A). Our results indicate that die-off begins with conversion of marsh vegetation into bare open water pools that are relatively far (\u3e 75 m) from tidal channels. As vegetation die-off continues, pools expand, and new pools emerge at shorter and shorter distances from channels. Consequently larger pools are found at larger distances from the channels. Our results suggest that the size of the pools and possibly the connection of pools with the tidal channel system have important bio-geomorphic implications and aggravate marsh deterioration. Moreover, we found that the temporal development of vegetation die-off in moderately degraded marshes is similar as the spatial die-off development along a present-day gradient, which indicates that the contemporary die-off gradient might be considered a chronosequence that offers a unique opportunity to study vegetation die-off processes

Aerodynamic analysis of Ampyx’s airborne wind energy system

Besides classical horizontal and vertical axis wind turbines, alternative ways to harvest wind energy are currently being explored. One promising concept is represented by airborne wind energy systems. Different airborne wind energy concepts have been ideated and investigated over the past few decades. The work reported here focuses on the concept being developed by Ampyx Power that basically generates power using a tethered airplane which drives a generator on the ground. The aim of the work reported here is to develop and compare design calculations for such a power plane. In this study a comparison was made between steady and unsteady RANS CFD calculations from SU2 and OpenFOAM. Subsequently, using the data from the CFD calculation two different power prediction models were developed and compared, one using 2D CFD data with the free vortex code AWSM and the other using the same data with a nonlinear lifting line approach to model the power plane in its figure eight flying trajectory. Overall, comparisons show that for all practical angles of attack, as well as a range of flap angles, that 2D CFD results agree extremely well between both solvers. The 3D CFD results show <20% differences on the computed total forces, despite achieving good agreement on the relative force contributions across the power plane. A very good agreement has also been established between the power prediction models

Final results from the EU project AVATAR: aerodynamic modelling of 10 MW wind turbines

This paper presents final results from the EU project AVATAR in which aerodynamic models are improved and validated for wind turbines on a scale of 10 MW and more. Special attention is paid to the improvement of low fidelity engineering (BEM based) models with higher fidelity (CFD) models but also with intermediate fidelity free vortex wake (FVW) models. The latter methods were found to be a good basis for improvement of induction modelling in engineering methods amongst others for the prediction of yawed cases, which in AVATAR was found to be one of the most challenging subjects to model. FVW methods also helped to improve the prediction of tip losses. Aero-elastic calculations with BEM based and FVW based models showed that fatigue loads for normal production cases were over predicted with approximately 15% or even more. It should then be realised that the outcome of BEM based models does not only depend on the choice of engineering add-ons (as is often assumed) but it is also heavily dependent on the way the induced velocities are solved. To this end an annulus and element approach are discussed which are assessed with the aid of FVW methods. For the prediction of fatigue loads the so-called element approach is recommended but the derived yaw models rely on an annulus approach which pleads for a generalised solution method for the induced velocities

Latest results from the EU project AVATAR: aerodynamic modelling of 10 MW wind turbines

This paper presents the most recent results from the EU project AVATAR in which aerodynamic models are improved and validated for wind turbines on a scale of 10 MW and more. Measurements on a DU 00-W-212 airfoil are presented which have been taken in the pressurized DNW-HDG wind tunnel up to a Reynolds number of 15 Million. These measurements are compared with measurements in the LM wind tunnel for Reynolds numbers of 3 and 6 Million and with calculational results. In the analysis of results special attention is paid to high Reynolds numbers effects. CFD calculations on airfoil performance showed an unexpected large scatter which eventually was reduced by paying even more attention to grid independency and domain size in relation to grid topology. Moreover calculations are presented on flow devices (leading and trailing edge flaps and vortex generators). Finally results are shown between results from 3D rotor models where a comparison is made between results from vortex wake methods and BEM methods at yawed conditions

Toward accurate CO_2 and CH_4 observations from GOSAT

The column-average dry air mole fractions of atmospheric carbon dioxide and methane (X_(CO_2) and X_(CH_4)) are inferred from observations of backscattered sunlight conducted by the Greenhouse gases Observing SATellite (GOSAT). Comparing the first year of GOSAT retrievals over land with colocated ground-based observations of the Total Carbon Column Observing Network (TCCON), we find an average difference (bias) of −0.05% and −0.30% for X_(CO_2) and X_(CH_4) with a station-to-station variability (standard deviation of the bias) of 0.37% and 0.26% among the 6 considered TCCON sites. The root-mean square deviation of the bias-corrected satellite retrievals from colocated TCCON observations amounts to 2.8 ppm for X_(CO_2) and 0.015 ppm for X_(CH_4). Without any data averaging, the GOSAT records reproduce general source/sink patterns such as the seasonal cycle of X_(CO_2) suggesting the use of the satellite retrievals for constraining surface fluxes

Analysis of factors relating to pet rabbits relinquished to two UK re-homing centres

Rabbits are a common companion animal in the UK and some reports suggest that large numbers are relinquished to re-homing centres each year. This study aimed to investigate the characteristics of rabbits relinquished to two UK re-homing centres and explore reasons given for relinquishment. The centres contributed data for all rabbits that entered their centre during 2013 (n=205). Most rabbits (59.5%) were relinquished by an owner. A similar number of males to females were relinquished and a larger number of rabbits were not neutered (72.4%) and adults (56%). Most rabbits were healthy on arrival (61.5%). The most common reasons for relinquishment were: too many rabbits / unplanned litters (30.3%) and housing problems (23.8%). Rabbit related reasons accounted for 12.2% of rabbits relinquished. Reasons for relinquishment were associated with one of the recorded rabbit characteristics. Further detailed studies are needed to explore the dynamics of pet rabbit ownership and factors that affect the breakdown of rabbit-owner relationships in the UK